Everythin345Archies™UPSIREN OEM Thermal Pad Silicone Plaster Thermal Pad CPU GPU Water Cooling Mat 0.75mm 1.25mm High Quality Heatsink Cooling pad

The OEM 16W heat dissipation effect is equivalent to Thermalright 12.8W

The OEM 18W has the same cooling effect as GELID GP-Extreme

The OEM 21W has the same cooling effect as GELID GP-Ultimate

Video Card Heat Dissipation Silicone Pad 16W/mk Laptop CPU/GPU Graphics Card Thermal Sheet Motherboard Silicone Grease Pads

The Thermal pad support customization and wholesale, large quantity with preferential treatment

Feature:

1. Strong plasticity, various sizes, and can be cut at will.
2. Durable, insulating and non-conductive. Non-corrosive, non-curing and non-toxic.
3. Easy to use, no need to apply silicone grease, just tear off the protective film on both sides to use.
4. It can be used for heating elements such as CPU, GPU, graphics card, memory, mining machine, SSD solid state drive, notebook computer, game equipment, LED, server, household appliances, radiator, capacitor and resistor.

Specification:

Color: Gray
Density: 3.5±02g/cc
Hardness: 30-50sc
Thermal conductivity: 16w/mk
Breakdown voltage: 10KV/mm
Corrosive: none
Product size: about 100*100mm
Thermal pad thickness: about 0.5mm/0.02inch, about 1.0mm/0.04inch, about 1.5mm/0.06 inch, about 2.0mm/0.08inch,about 2.5mm/0.1 inch, about 3.0mm/0.12 inch(optional)

Instructions for use:

Install the thermal pad:
The installation of thermal pads is much simpler than thermal paste, because they can easily fit in various places where heat dissipation is required, so even a novice has no difficulty.
Remove the old thermal pad:
every time the radiator is removed or installed. Aged thermal pads need to be removed. Clean up thoroughly. And use a new thermal pad. Otherwise, the cooling effect will be affected.
Thermal pad size and thickness description:
The thermal conductivity is the same for each thickness. Thermal pads can be purchased in various thicknesses and sizes. Users can also cut them to desired size.

FAQ:

How to choose the size you need.
1: Calculate the size of each location that needs to be cooled.
2: Calculate the thickness of the thermal pad according to the gap between the boards.
3: The thermal pad is soft. The thickness needs to be increased by 0.5-1.0mm in the calculation. Fits tightly after installation squeeze. Better heat dissipation.
4: When the thickness of the purchased thermal pad is insufficient, it can also be used in superposition.
5: The heat dissipation effect is best only when the two sides of the thermal pad are closely fitted and not crushed.

18w/mk Thermal conductivity Thermal pad High quality 100X100mm CPU Heatsink Cooling Conductive Silicone Pad Thermal Pads

The Thermal pad support customization and wholesale, large quantity with preferential treatment

Cool in Seconds

With a thermal conductivity of 18W/mK, our thermal pad greatly improves heat transfer between the electronic elements and effectively cool the temperature down in seconds. It also provides insulation, shock absorption, extra sealing and protection for your electronic elements

Easy to Use:

100 x 100mm with slightly sticky on dual sides, cut it freely for your customized demand, tear off the dual-side protective film and paste it. The soft and compressible upgraded thermal material allows 30-40% compression rate which is a perfect substitute for traditional radiator compound grease.

Reliable & Safe:

High temperature resistance, works perfectly in -40℃-200℃. Non-toxic, odorless, anti-corrosion, anti-static, flame-retardant, compression, good insulation. The breakdown voltage of the silicone thermal pad above 1mm can reach 10KV, contacting with any electronic element will not damage it. ROHS certifiated & environment friendly.

Wide Application:

Suitable for electronics PCB surface, controller, CPU, GPU, radiator, power supply, VAG card, hard disk, computer host, notebook computer, memory stick, 3080/3090 graphics card, game console, car electrical appliances, microwave oven, TV, set-top box DC -DC, PDP LED IC SMD DIP and other cooling modules

21w/mk Thermal conductivity Thermal pad High quality 100X100mm CPU Heatsink Cooling Conductive Silicone Pad Thermal Pads

The Thermal pad support customization and wholesale, large quantity with preferential treatment

Main Features:

Specially developed for electronic products to solve the high temperature problem of frequency reduction, the material is soft and compressible, the product hardness reaches 30 degrees, soft and moderate can be compressed at will, can closely fit the chip, enhance the chip cooling efficiency, efficient cooling.

thermal pad has 21W/mK Thermal Conductivity, High temperature performance in -40 ℃ - 200 ℃ will not melt, Used to fill the gap between the heating element and the Heatsink, Achieve the best cooling effect,

thermal pad with good Insulation,Non-conductive, anti-static, wear-resistant, compression, buffering, fire-retardant, anti-corrosion,Non-toxic, odorless, no damage to metal materials, etc effect.

Applicable industry:

LED industry, automotive electronics industry, power industry, PDP/LED flat-panel TV, communications industry, Industrial industry, household electrical appliance industry.

Widely application for:

1: Electronic products, motherboard, motor, external pad and foot pad, electronic, appliances, high power LED lighting, Car machine.

2: Power devices, automotive electronic modules (engine scrubber) Power modules, high power power supplies.

3: Computer host (CPU, GPU, USICS, RDRAMTM, CD-ROM, IGPT module, hard drives), laptop and any electronic equipment needing to be filled with heat dissipation.