PRIME PLUS SAVINGS
Auto Apply at Checkout
Buy More Save More
Cart
| English (EN) | USD
Everythin345Archies™19.3cmx5m New Toner Reactive Foil by Laser Printer and Laminator Paper Holographic Heat Transfer Crafts Foils New DIY Tool 2024
$12.99 USD$22.29 USD
Color:
Specification:
100% Brand New
Quantity:1pcs
Material: Anodized Aluminum
Size:
Width: 19.3cm Length: 5m
Conversion:1cm =0.39 inch
Note:
1.Due to the light and screen difference, the item's color may be slightly different from the pictures.
2.Please allow 1-3cm difference due to manual measurement.
3.Thanks for your kindly understanding!
EASY DIY Foil with a Laminator and Laser Printer
Step 1: Print your patterns on regular paper or card stock with your laser printer;
Step 2: Next, roll out your toner-reactive foil over your paper, shiny side up. Make sure it covers all of the black ink on your paper;
Step 3: Trim the foil so that it fits perfectly over the sheet of paper;
Step 4: Place a piece of card stock over the top of the foil to hold the metallic foil in place;
Step 5: Now that you have sandwiched your foil between the two pieces of paper, run it through your laminator. Sometimes you need to do this twice or three times just to make sure the foil reacts to the toner as well as you want it to;
(TIP: Make sure your laminator is warmed up properly before use. )
Step 6: Your foil will be attached to the bottom sheet of paper. Peel it off slowly.
Product Display:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
100% Brand New
Quantity:1pcs
Material: Anodized Aluminum
Size:
Width: 19.3cm Length: 5m
Conversion:1cm =0.39 inch
Note:
1.Due to the light and screen difference, the item's color may be slightly different from the pictures.
2.Please allow 1-3cm difference due to manual measurement.
3.Thanks for your kindly understanding!
EASY DIY Foil with a Laminator and Laser Printer
Step 1: Print your patterns on regular paper or card stock with your laser printer;
Step 2: Next, roll out your toner-reactive foil over your paper, shiny side up. Make sure it covers all of the black ink on your paper;
Step 3: Trim the foil so that it fits perfectly over the sheet of paper;
Step 4: Place a piece of card stock over the top of the foil to hold the metallic foil in place;
Step 5: Now that you have sandwiched your foil between the two pieces of paper, run it through your laminator. Sometimes you need to do this twice or three times just to make sure the foil reacts to the toner as well as you want it to;
(TIP: Make sure your laminator is warmed up properly before use. )
Step 6: Your foil will be attached to the bottom sheet of paper. Peel it off slowly.
Product Display:
You may also like
Recently view
Today Only: Seret privileges for you!
Have a look at our Privacy Policy to understand how we process your data for marketing emails
