H-type ion proton exchange membrane experimental electrochemical double electrolyzer electrolytic water oxyhydrogen device

Customize various specifications h electrolytic cell, If there is no capacity you need in the option, please leave a message to the customer service staff. The customer service staff will reply as soon as possible after seeing your message.

Product Name: H-type electrolytic cell (non sealed type), for example: u-30ml = 2 single cells are 30ml non sealed H-type electrolytic cell.

Product Description:

1. Electrolytic cell: the monomer capacity is 30-1000ml, and other specifications can be customized.

2. 30-1000ml, the inner diameter of the exchange port is about 15mm, which is suitable for the membrane with a diameter of about 30mm.

List of products contained in unsealed electrolyzer:

1. Two glass slots.

2. Two Teflon covers.

The default number of holes in the cover is: there are 3 electrode holes on each cover. There are 6 electrode holes on the 2 cover plates, and the diameter of the electrode hole is about 6mm (if there are other opening requirements, please contact the customer service personnel).

3. Electrode fixing ring.

4. Ball joint clamp.

5. Liquid leakage proof gasket.

Product Name: H-type electrolytic cell (sealed type) only needs the solution to fill the exchange port and isolate the two cells, which can separate the positive and negative poles of the electrolytic solution, and the two cells produce different gases. It can also be used in electrolytic experiments that need to be sealed.

For example, s-30ml = 2 single electrolyzers are 30ml sealed H-type electrolyzers.

Product Description:

1. Electrolytic cell: the monomer capacity is 30-1000ml, and other specifications can be customized.

2. 30-1000ml, the inner diameter of the exchange port is about 15mm, which is suitable for the membrane with a diameter of about 30mm.

Product list of sealed electrolyzer:

1. Two glass slots.

2. Two Teflon covers.

The default number of holes in the cover is:

2. One cover has one electrode hole + two pores, and the other cover has two electrode holes + two pores. The diameter of the electrode hole is about 6mm, and the diameter of the air hole is about 3mm (if there are other opening requirements, please contact the customer service personnel).

3. Electrode fixing ring.

4. Ball joint clamp.

5. Liquid leakage proof gasket.

Optional accessories (not included):

Platinum electrode clip, calomel electrode, silver chloride electrode, platinum sheet electrode and 30mm diameter ionic membrane

The electrodes in the photos are only for demonstration and are not included.