12V 30A 9-Stage Smart Car Battery Charger 6V-12V-24V Large LCD Display for Lithium LiFePO4 Lead-acid RV Motorcycle Battery Repair
Product Description:
1. Efficient charging: The smart charger uses high-frequency charging technology,which
can greatly shorten the charging time, improve the charging efficiency, and effectively
avoid the problems of battery damage and shortened life caused by overcharging and
too long charging time.
2. Intelligent control: The charger has intelligent control function, which can automatically
identify the type and status of the battery, charge according to the batterycondition,
avoid overcharge and undercharge, protect the battery and extend the battery life.
3. Multiple protection: The smart pulse charger has multiple protection functions,
including overcharge protection, over current protection, short circuit protection,reverse
connection protection, etc., to ensure the safety of the charging process.
4. Portable design: The charger adopts portable design, easy to carry, suitable
forvarious occasions Charging requirements
- Charge current switch.
-Have Memory mode after power off
-For batteries used on Battery Management Systems(BMS) only.
-For charging 12V or 24V LiFePO4 batteries.
-For activation or maintenance of weak, old and idle batteries.
Used to select a mode for charging 12V or 24V Lithium batteries,
-Can not repair severely damaged batteries. Not for Lithium and LiFePO4 batteries.
-For ordinary lead-acid batteries/maintenance-free batteries
including AGM, GEL, SLA, WET, DEEP CYCLE, EFB,Calcium, etc.
AC Input Voltage:100-240V~50/60Hz
Input Power with Load:Max 420W
Dimension:230*185*110mm
Output Voltage:6V/12V/24V
Output Current:6V Max 10A /12V Max 30A/24V Max 16A
Suit for Battery Type:Lithium,LiFePO4,Lead-acid[AGM,GEL,SLA,Flooded,WET,EFB,etc..]
1: Battery voltage indicator during charging
2: Winter mode indicator (light up according to external temperature)
is below 10 degrees Celsius
3:Summer mode indicator (which lights up according to the outside
temperature) is higher than 28 degrees Celsius
4: Low current charging mode (6V 2A, 12V 3A, 24V 5A)
5: Medium current charging mode (6V 5A, 12V 15A, 24V 10A)
6: High current charging mode (6V 10A, 12V 30A, 24V 16A)
7: Repair mode
8: Charging saturation state
9: Mode selection button
20A :
AC input: 100-240 V 50/60Hz
Output voltage :12 V / 24 V
Output current :12V20A & 24V10A
No-load output voltage :27.6V
Minimum starting voltage: >7.0V
Power and load :MAX 240W
Size :158 x90x50mm(6.22 x3.54 x1.97 inches)
Suit for :Lithium/LiFePO4/Lead-Acid (AGM,GEL,EFB, MF, FLOODED, VRLA, SLA and Wet batteries..)
What you Get:
1x 30A Charger/20A Charger (As you Ordered)
1x User Manner
1x Clip line
1x AC Cable(EU/US/UK/AU OPtional)
Please Note:
The P20 pro(20A Charger )don't have 6V
30A:
20A:
