Range Resolution Accuracy
60A 0.01A +-(3%reading+10digits)
600A 0.1A
Different function of the models
● The CM83A only support testing AC current.
● CM83E/CM86B can measure DC Current.
● CM83E/CM86B can clear data to zero
● CM83E/CM86B supports testing with temperature probe.（send temperature probe）
● CM86B with iFlex flexible clamp,the AC current range can be extended to 3000A
Special function only for CM86B
INRUSH current, Live, True RMS, AUTO-Vloz, VFD
The AC current range can be extended to 3000A with iFlex flexible clamp
CM86B:1000A AC DC clamp meter
Auto-ranging clamp meter with multiple functions in one
NCV non-contact measurement
When the NCV induction probe of the instrument is close to the circuit under test, different alarm prompts will be issued according to the voltage intensity
DC current measurement
When<0.4A,the signal input on the screen will flicker>=0.5A will not flicker
Multipurpose display
Widely used in electric power/communication / railway/construction/oil field/metering /scientific research and teaching/industrial and mining enterprises,etc.
Live Firewire Recognition
Insert the red test lead into the neutral frie wire port,if it is detected as a live wire,the buzzer will sound an alarm,if it is the neutral wire and the ground wire,there is no response
Inrush current measurement
Measure the maximum current at the moment when the machine is started, Set the gear to AC and DC current gear, short press to enter INRUSH measurement
DC current reset
The ZERO clearing function is only used for DC current,and the DC currentAffected by magnetic field,long press the ZERO button to reset before measurement
Contact temperature measurement
Rotate the switch to the temperature gear, plug in the temperature probe to measure, press the SEL button to switch between Celsius and Fahrenheit
HD Backlight
Work measurement day or night
42mm large jaw
Large jaw design,suitable for cable measurement wthin 42mm
Detailed function
Detailed analysis and actual measurement of each function
Data retention
Hold symbol on the screen every 3 seconds after pressing the data hold key It will falsh once,press again to cancel
